AUTEL AC MaxiCharger
EV charger by AUTEL. Compatibility with energy supplier apps, Home Assistant and evcc.
At a glance
| Device type | EV charger [evcc template, 2026-10-19] |
|---|---|
| evcc support | Yes |
| Connection | OCPP (inferred from evcc template parameters) [evcc template, 2026-10-19] |
| Local control (no cloud) | Yes via evcc's connection type [evcc template, 2026-10-19] |
| Home Assistant | Unknown know this? tell us (brand not yet checked) |
| Known firmware notes | Setup Guide:
* Validate required firmware version: Charge Control Module: V1.51.00, Power Control Module: V1.19.00
* In the Autel Charge app, click on "OCPP Server"
* In the search bar type "Custom" and select it.
* Server URL: `ws://<evcc-host>:8887/` (local network connection)
* Charger ID: Leave empty (for use the serial number) or set custom value which is reused in configuration as *stationid*
* Authorisation Key: leave empty [evcc template, 2026-10-19] |
Energy supplier apps
Supplier lists are published per brand (sometimes with model conditions). A brand match does not guarantee your exact model works — check the linked page or the supplier's app.
| Supplier / service | Status for AUTEL charger | Source |
|---|---|---|
| Frank Energie | Not listed AUTEL is not on Frank Energie's EV-charger list | [source, 2026-10-19] |
| Tibber | Not listed AUTEL is not on Tibber's EV-charger list | [source, 2026-10-19] |
| Zonneplan | Not listed Zonneplan only lists its own hardware | [source, 2026-10-19] |
| Eneco | Unknown know this? tell us | — |
| ANWB Energie | Unknown know this? tell us | — |
| Vattenfall | Unknown know this? tell us | — |
Home Assistant integrations for AUTEL
Unknown know this? tell us — we have not yet checked Home Assistant support for AUTEL.
evcc details
| Template | ocpp-autel (charger) [source, 2026-10-19] |
|---|---|
| Connection | OCPP (inferred) |
| Capabilities | mAdim [source, 2026-10-19] |
| Requirements | Setup Guide:
* Validate required firmware version: Charge Control Module: V1.51.00, Power Control Module: V1.19.00
* In the Autel Charge app, click on "OCPP Server"
* In the search bar type "Custom" and select it.
* Server URL: `ws://<evcc-host>:8887/` (local network connection)
* Charger ID: Leave empty (for use the serial number) or set custom value which is reused in configuration as *stationid*
* Authorisation Key: leave empty [source, 2026-10-19]evcc sponsor token required |
| Known caveats | None listed in the evcc template. |
“Works for me” reports
No user reports yet. Report your firmware version and setup TODO: form
Where to buy
Shop links will appear here. TODO: affiliate placeholder — no links yet See our affiliate disclosure.