Danfoss TripleLynx TLX/TLX+
Solar inverter by Danfoss. Compatibility with energy supplier apps, Home Assistant and evcc.
At a glance
| Device type | Solar inverter [evcc template, 2026-10-19] |
|---|---|
| evcc support | Yes |
| Connection | Local HTTP API (inferred from evcc template parameters) [evcc template, 2026-10-19] |
| Local control (no cloud) | Yes via evcc's connection type [evcc template, 2026-10-19] |
| Home Assistant | Unknown know this? tell us (brand not yet checked) |
| Known firmware notes | Unknown know this? tell us |
Energy supplier apps
Supplier lists are published per brand (sometimes with model conditions). A brand match does not guarantee your exact model works — check the linked page or the supplier's app.
| Supplier / service | Status for Danfoss inverter | Source |
|---|---|---|
| Frank Energie | Not listed Danfoss is not on Frank Energie's inverter list | [source, 2026-10-19] |
| Tibber | Not listed Danfoss is not on Tibber's inverter list | [source, 2026-10-19] |
| Zonneplan | Not listed Zonneplan only lists its own hardware | [source, 2026-10-19] |
| Eneco | Unknown know this? tell us | — |
| ANWB Energie | Unknown know this? tell us | — |
| Vattenfall | Unknown know this? tell us | — |
Home Assistant integrations for Danfoss
Unknown know this? tell us — we have not yet checked Home Assistant support for Danfoss.
evcc details
| Template | danfoss-triplelynx-tlx (meter; usages: pv) [source, 2026-10-19] |
|---|---|
| Connection | Local HTTP API (inferred) |
| Capabilities | Unknown know this? tell us |
| Requirements | Communication uses the RS485 port of the inverter (ComLynx protocol).
**Wiring (RJ45 connector on the inverter):**
- Pin 1: GND
- Pin 2: B (RS485-)
- Pin 3: A (RS485+)
- Pin 6: B (daisy-chain to next device)
- Pin 7: A (daisy-chain to next device)
Termination resistors (120 Ω) are required at both ends of the bus
(bridge pins 4→6 and 5→7 on the inverter).
Connect a USB-RS485 adapter (or a network serial bridge) to the RS485 bus.
For multiple inverters on one bus set the `node` parameter for each meter entry. [source, 2026-10-19] |
| Known caveats | None listed in the evcc template. |
“Works for me” reports
No user reports yet. Report your firmware version and setup TODO: form
Where to buy
Shop links will appear here. TODO: affiliate placeholder — no links yet See our affiliate disclosure.