Easee Charge Core
EV charger by Easee. Compatibility with energy supplier apps, Home Assistant and evcc.
At a glance
| Device type | EV charger [evcc template, 2026-10-19] |
|---|---|
| evcc support | Yes 2 connection methods: |
| Connection | Cloud APIOCPP (inferred from evcc template parameters) [evcc template, 2026-10-19] |
| Local control (no cloud) | Yes via evcc's connection type [evcc template, 2026-10-19] |
| Home Assistant | 1 integration for Easee (brand-level, see below) [first source, 2026-10-19] |
| Known firmware notes | Requirements:
* Firmware version >= 328 with native OCPP enabled
* Beta firmware required for current control via OCPP (tested with v9012)
* OCPP must be enabled via the Easee API:
* `evcc easee-ocpp --user <email> --password <password> --charger <serial> enable --url ws://<evcc-host>:8887/`
* To disable: `evcc easee-ocpp ... disable`
* Check status: `evcc easee-ocpp ... status`
* The charger serial number is automatically used as station ID
* Protocol: OCPP-J v1.6, Websocket, ws://
* Local network connection
* Minimum meter interval: 30s [evcc template, 2026-10-19] |
Energy supplier apps
Supplier lists are published per brand (sometimes with model conditions). A brand match does not guarantee your exact model works — check the linked page or the supplier's app.
| Supplier / service | Status for Easee charger | Source |
|---|---|---|
| Frank Energie Slim Laden |
Supported “Ondersteund — 3 modellen”
|
[source, 2026-10-19] |
| Tibber Slim laden (charger) |
Supported “integrated charger”
|
[source, 2026-10-19] |
| Zonneplan | Not listed Zonneplan only lists its own hardware | [source, 2026-10-19] |
| Eneco | Unknown know this? tell us | — |
| ANWB Energie | Unknown know this? tell us | — |
| Vattenfall | Unknown know this? tell us | — |
Home Assistant integrations for Easee
Brand-level match: these integrations target Easee hardware; whether they cover the Charge Core specifically is not verified.
| Integration | Type | Local / cloud | Source |
|---|---|---|---|
Easee EV charger easeeCustom component for Easee EV charger integration with Home Assistant |
HACS ★284 | Unknown know this? tell us | [HACS index, 2026-10-19] |
evcc details
Method 1: Cloud — easee
| Template | easee (charger) [source, 2026-10-19] |
|---|---|
| Connection | Cloud API (inferred) |
| Capabilities | rfid1p3pmeterdim [source, 2026-10-19] |
| Requirements | None listed in the evcc template. evcc sponsor token required |
| Known caveats | Infrequent energy updates can distort charging history and session statistics. [issue] With multiple chargers in one Easee circuit, phase switching affects all of them. [issue] [source, 2026-10-19] |
Method 2: OCPP — ocpp-easee
| Template | ocpp-easee (charger) evcc name: “Charge Core (OCPP)” [source, 2026-10-19] |
|---|---|
| Connection | OCPP (inferred) |
| Capabilities | rfiddim [source, 2026-10-19] |
| Requirements | Requirements:
* Firmware version >= 328 with native OCPP enabled
* Beta firmware required for current control via OCPP (tested with v9012)
* OCPP must be enabled via the Easee API:
* `evcc easee-ocpp --user <email> --password <password> --charger <serial> enable --url ws://<evcc-host>:8887/`
* To disable: `evcc easee-ocpp ... disable`
* Check status: `evcc easee-ocpp ... status`
* The charger serial number is automatically used as station ID
* Protocol: OCPP-J v1.6, Websocket, ws://
* Local network connection
* Minimum meter interval: 30s [source, 2026-10-19]evcc sponsor token required |
| Known caveats | None listed in the evcc template. |
“Works for me” reports
No user reports yet. Report your firmware version and setup TODO: form
Where to buy
Shop links will appear here. TODO: affiliate placeholder — no links yet See our affiliate disclosure.