EVBox Elvi
EV charger by EVBox. Compatibility with energy supplier apps, Home Assistant and evcc.
At a glance
| Device type | EV charger [evcc template, 2026-10-19] |
|---|---|
| evcc support | Yes |
| Connection | OCPP (inferred from evcc template parameters) [evcc template, 2026-10-19] |
| Local control (no cloud) | Yes via evcc's connection type [evcc template, 2026-10-19] |
| Home Assistant | Unknown know this? tell us (brand not yet checked) |
| Known firmware notes | Unknown know this? tell us |
Energy supplier apps
Supplier lists are published per brand (sometimes with model conditions). A brand match does not guarantee your exact model works — check the linked page or the supplier's app.
| Supplier / service | Status for EVBox charger | Source |
|---|---|---|
| Frank Energie | Not listed EVBox is not on Frank Energie's EV-charger list | [source, 2026-10-19] |
| Tibber | Not listed EVBox is not on Tibber's EV-charger list | [source, 2026-10-19] |
| Zonneplan | Not listed Zonneplan only lists its own hardware | [source, 2026-10-19] |
| Eneco | Unknown know this? tell us | — |
| ANWB Energie | Unknown know this? tell us | — |
| Vattenfall | Unknown know this? tell us | — |
Home Assistant integrations for EVBox
Unknown know this? tell us — we have not yet checked Home Assistant support for EVBox.
evcc details
| Template | ocpp-evbox-elvi (charger) [source, 2026-10-19] |
|---|---|
| Connection | OCPP (inferred) |
| Capabilities | dim [source, 2026-10-19] |
| Requirements | If the device is installed with phaserotation, this can be configured in the EVBox Elvi with the EVBox Connect App so the voltages and currents are reported on the correct phase. This is necessary for the loadmanagement of EVBox, but for the usage with evcc the phaserotation should not be configured inside the EVBox Elvi. Especially if the Elvi was used in a EVBox loadmanagement, it should be ensured in the Installationmode of the EVBox Connect App that the string under "Phaserotation" ends with "RST". [source, 2026-10-19]evcc sponsor token required |
| Known caveats | None listed in the evcc template. |
“Works for me” reports
No user reports yet. Report your firmware version and setup TODO: form
Where to buy
Shop links will appear here. TODO: affiliate placeholder — no links yet See our affiliate disclosure.