Grizzl-E Mini Connect
EV charger by Grizzl-E. Compatibility with energy supplier apps, Home Assistant and evcc.
At a glance
| Device type | EV charger [evcc template, 2026-10-19] |
|---|---|
| evcc support | Yes |
| Connection | OCPP (inferred from evcc template parameters) [evcc template, 2026-10-19] |
| Local control (no cloud) | Yes via evcc's connection type [evcc template, 2026-10-19] |
| Home Assistant | Unknown know this? tell us (brand not yet checked) |
| Known firmware notes | Unknown know this? tell us |
Energy supplier apps
Supplier lists are published per brand (sometimes with model conditions). A brand match does not guarantee your exact model works — check the linked page or the supplier's app.
| Supplier / service | Status for Grizzl-E charger | Source |
|---|---|---|
| Frank Energie | Not listed Grizzl-E is not on Frank Energie's EV-charger list | [source, 2026-10-19] |
| Tibber | Not listed Grizzl-E is not on Tibber's EV-charger list | [source, 2026-10-19] |
| Zonneplan | Not listed Zonneplan only lists its own hardware | [source, 2026-10-19] |
| Eneco | Unknown know this? tell us | — |
| ANWB Energie | Unknown know this? tell us | — |
| Vattenfall | Unknown know this? tell us | — |
Home Assistant integrations for Grizzl-E
Unknown know this? tell us — we have not yet checked Home Assistant support for Grizzl-E.
evcc details
| Template | ocpp-grizzl-e (charger) [source, 2026-10-19] |
|---|---|
| Connection | OCPP (inferred) |
| Capabilities | dim [source, 2026-10-19] |
| Requirements | The charger needs to have the OCPP feature enabled. Contact Grizzl-E support if it is not.
Setup Guide:
* In the charger web UI, set the OCPP server URL to `ws://<evcc-host>:8887/`. Leave "Data" empty and keep "Station ID" and "Auth key" as-is.
* Set the minimum charge current to 7 A. The charger ignores lower limits.
* Enable "1A current control" for your vehicle. The charger only supports whole-amp currents.
"Start remote transaction on vehicle connection" is always enabled.
Once the charger OCPP configuration points to evcc, the vendor app stops showing data about the charger. To keep the data visible in the vendor app:
* In evcc, configure an OCPP forward with upstream server URL `wss://ocpp.unitedchargers.com/ocpp1.6` and the username and password from the charger OCPP configuration.
* In the advanced forward settings, enable "Block commands from the upstream server".
* In the advanced charger settings, set "Authentication token" to `uc_default_auth`. [source, 2026-10-19]evcc sponsor token required |
| Known caveats | None listed in the evcc template. |
“Works for me” reports
No user reports yet. Report your firmware version and setup TODO: form
Where to buy
Shop links will appear here. TODO: affiliate placeholder — no links yet See our affiliate disclosure.