KEBA KeContact P40 Pro
EV charger by KEBA. Compatibility with energy supplier apps, Home Assistant and evcc.
At a glance
| Device type | EV charger [evcc template, 2026-10-19] |
|---|---|
| evcc support | Yes |
| Connection | Modbus TCP (inferred from evcc template parameters) [evcc template, 2026-10-19] |
| Local control (no cloud) | Yes via evcc's connection type [evcc template, 2026-10-19] |
| Home Assistant | Unknown know this? tell us (brand not yet checked) |
| Known firmware notes | Following settings have to be enabled using the KEBA eMobility App:
* Enable Modbus: The "Enable" and "Enable RFID" options must be activated in the "Modbus" settings.
* To use RFID cards, the "Authorization" option must be activated under "Device".
* For phase switching the minimum firmware version 1.3.0 must be installed. In the "Photovoltaic Optimized Charging" settings, the phase switching needs to be enabled. The "communication channel" must be set to "Modbus". [evcc template, 2026-10-19] |
Energy supplier apps
Supplier lists are published per brand (sometimes with model conditions). A brand match does not guarantee your exact model works — check the linked page or the supplier's app.
| Supplier / service | Status for KEBA charger | Source |
|---|---|---|
| Frank Energie Slim Laden |
Supported “Ondersteund — 2 modellen”
|
[source, 2026-10-19] |
| Tibber | Not listed KEBA is not on Tibber's EV-charger list | [source, 2026-10-19] |
| Zonneplan | Not listed Zonneplan only lists its own hardware | [source, 2026-10-19] |
| Eneco | Unknown know this? tell us | — |
| ANWB Energie | Unknown know this? tell us | — |
| Vattenfall | Unknown know this? tell us | — |
Home Assistant integrations for KEBA
Unknown know this? tell us — we have not yet checked Home Assistant support for KEBA.
evcc details
| Template | keba-modbus-p40 (charger) [source, 2026-10-19] |
|---|---|
| Connection | Modbus TCP (inferred) |
| Capabilities | mArfid1p3pdim [source, 2026-10-19] |
| Requirements | Following settings have to be enabled using the KEBA eMobility App:
* Enable Modbus: The "Enable" and "Enable RFID" options must be activated in the "Modbus" settings.
* To use RFID cards, the "Authorization" option must be activated under "Device".
* For phase switching the minimum firmware version 1.3.0 must be installed. In the "Photovoltaic Optimized Charging" settings, the phase switching needs to be enabled. The "communication channel" must be set to "Modbus". [source, 2026-10-19]evcc sponsor token required |
| Known caveats | None listed in the evcc template. |
“Works for me” reports
No user reports yet. Report your firmware version and setup TODO: form
Where to buy
Shop links will appear here. TODO: affiliate placeholder — no links yet See our affiliate disclosure.