Home › Plugchoice › EV charger
Plugchoice eV charger
EV charger by Plugchoice. Compatibility with energy supplier apps, Home Assistant and evcc.
evcc gives no model name for this entry; the name above is derived from the brand and device type.
At a glance
| Device type | EV charger [evcc template, 2026-10-19] |
|---|---|
| evcc support | Yes |
| Connection | Cloud API (inferred from evcc template parameters) [evcc template, 2026-10-19] |
| Local control (no cloud) | No — cloud only in evcc [evcc template, 2026-10-19] |
| Home Assistant | Unknown know this? tell us (brand not yet checked) |
| Known firmware notes | Unknown know this? tell us |
Energy supplier apps
Supplier lists are published per brand (sometimes with model conditions). A brand match does not guarantee your exact model works — check the linked page or the supplier's app.
| Supplier / service | Status for Plugchoice charger | Source |
|---|---|---|
| Frank Energie | Not listed Plugchoice is not on Frank Energie's EV-charger list | [source, 2026-10-19] |
| Tibber | Not listed Plugchoice is not on Tibber's EV-charger list | [source, 2026-10-19] |
| Zonneplan | Not listed Zonneplan only lists its own hardware | [source, 2026-10-19] |
| Eneco | Unknown know this? tell us | — |
| ANWB Energie | Unknown know this? tell us | — |
| Vattenfall | Unknown know this? tell us | — |
Home Assistant integrations for Plugchoice
Unknown know this? tell us — we have not yet checked Home Assistant support for Plugchoice.
evcc details
| Template | plugchoice (charger) [source, 2026-10-19] |
|---|---|
| Connection | Cloud API (inferred) |
| Capabilities | meterdim [source, 2026-10-19] |
| Requirements | Chargers connected through Plugchoice can leverage its OCPP proxy functionality to establish a connection to other backoffices while maintaining full control through evcc. This allows seamless management of Plugchoice-registered chargers directly from evcc.
For improved meter readings, it is recommended to configure the following settings in the Plugchoice portal under the configuration tab:
- Set `MeterValueSampleInterval` to 10 seconds (or another interval according to your preference).
- Set `MeterValuesSampledData` to `Energy.Active.Import.Register,Current.Offered,Current.Import,Voltage`.
These adjustments enable more frequent and detailed reporting of charging data to evcc. [source, 2026-10-19]evcc sponsor token required |
| Known caveats | None listed in the evcc template. |
“Works for me” reports
No user reports yet. Report your firmware version and setup TODO: form
Where to buy
Shop links will appear here. TODO: affiliate placeholder — no links yet See our affiliate disclosure.