Sigenergy EVDC
EV charger by Sigenergy. Compatibility with energy supplier apps, Home Assistant and evcc.
At a glance
| Device type | EV charger [evcc template, 2026-10-19] |
|---|---|
| evcc support | Yes |
| Connection | Modbus TCP (inferred from evcc template parameters) [evcc template, 2026-10-19] |
| Local control (no cloud) | Yes via evcc's connection type [evcc template, 2026-10-19] |
| Home Assistant | 1 integration for Sigenergy (brand-level, see below) [first source, 2026-10-19] |
| Known firmware notes | Modbus TCP must be enabled in the configuration app with installer rights. The Modbus ID is that of the hybrid inverter the EVDC is attached to. Requires current firmware (Modbus protocol V2.9). [evcc template, 2026-10-19] |
Energy supplier apps
Supplier lists are published per brand (sometimes with model conditions). A brand match does not guarantee your exact model works — check the linked page or the supplier's app.
| Supplier / service | Status for Sigenergy charger | Source |
|---|---|---|
| Frank Energie | Not listed Sigenergy is not on Frank Energie's EV-charger list | [source, 2026-10-19] |
| Tibber | Not listed Sigenergy is not on Tibber's EV-charger list | [source, 2026-10-19] |
| Zonneplan | Not listed Zonneplan only lists its own hardware | [source, 2026-10-19] |
| Eneco | Unknown know this? tell us | — |
| ANWB Energie | Unknown know this? tell us | — |
| Vattenfall | Unknown know this? tell us | — |
Home Assistant integrations for Sigenergy
Brand-level match: these integrations target Sigenergy hardware; whether they cover the EVDC specifically is not verified.
| Integration | Type | Local / cloud | Source |
|---|---|---|---|
Sigenergy ESS sigenSigenergy Energy Storage System Integration for local Modbus‑TCP monitoring and control into Home Assistant. Gain real‑time insights, dynamic device management, and seamless UI‑based setup. |
HACS ★309 | local (per repo description) | [HACS index, 2026-10-19] |
evcc details
| Template | sigenergy-evdc (charger) [source, 2026-10-19] |
|---|---|
| Connection | Modbus TCP (inferred) |
| Capabilities | mAmeterdim [source, 2026-10-19] |
| Requirements | Modbus TCP must be enabled in the configuration app with installer rights. The Modbus ID is that of the hybrid inverter the EVDC is attached to. Requires current firmware (Modbus protocol V2.9). [source, 2026-10-19]evcc sponsor token required |
| Known caveats | None listed in the evcc template. |
“Works for me” reports
No user reports yet. Report your firmware version and setup TODO: form
Where to buy
Shop links will appear here. TODO: affiliate placeholder — no links yet See our affiliate disclosure.