SolarEdge Home EV Charger
EV charger by SolarEdge. Compatibility with energy supplier apps, Home Assistant and evcc.
At a glance
| Device type | EV charger [evcc template, 2026-10-19] |
|---|---|
| evcc support | Yes |
| Connection | Modbus TCP (inferred from evcc template parameters) [evcc template, 2026-10-19] |
| Local control (no cloud) | Yes via evcc's connection type [evcc template, 2026-10-19] |
| Home Assistant | 4 integrations for SolarEdge (brand-level, see below) [first source, 2026-10-19] |
| Known firmware notes | Requires firmware version 3.10.42 (C-series) bzw. 1.11 (X-series). For phase switching the Keba phase switch (KeContact S10) is also required and the switching control via Modbus must be set in the wallbox settings. For the X-series in the web menu, for the C-series via Modbus by setting the value "3" in register 5050. [evcc template, 2026-10-19] |
Energy supplier apps
Supplier lists are published per brand (sometimes with model conditions). A brand match does not guarantee your exact model works — check the linked page or the supplier's app.
| Supplier / service | Status for SolarEdge charger | Source |
|---|---|---|
| Frank Energie | Not listed SolarEdge is not on Frank Energie's EV-charger list | [source, 2026-10-19] |
| Tibber | Not listed SolarEdge is not on Tibber's EV-charger list | [source, 2026-10-19] |
| Zonneplan | Not listed Zonneplan only lists its own hardware | [source, 2026-10-19] |
| Eneco | Unknown know this? tell us | — |
| ANWB Energie | Unknown know this? tell us | — |
| Vattenfall | Unknown know this? tell us | — |
Home Assistant integrations for SolarEdge
Brand-level match: these integrations target SolarEdge hardware; whether they cover the Home EV Charger specifically is not verified.
| Integration | Type | Local / cloud | Source |
|---|---|---|---|
SolarEdge solaredge |
Core | cloud_polling | [manifest, 2026-10-19] |
SolarEdge Modbus solaredge_modbus |
Core | local_polling | [manifest, 2026-10-19] |
SolarEdge Modbus solaredge_modbusHome assistant Component for reading data locally from Solaredge inverter through modbus TCP |
HACS ★417 | local (per repo description) | [HACS index, 2026-10-19] |
SolarEdge Modbus Multi Device solaredge_modbus_multiThe Complete Local (Modbus/TCP) SolarEdge Integration for Home Assistant |
HACS ★332 | local (per repo description) | [HACS index, 2026-10-19] |
evcc details
| Template | keba-modbus (charger) [source, 2026-10-19] |
|---|---|
| Connection | Modbus TCP (inferred) |
| Capabilities | mArfid1p3pdim [source, 2026-10-19] |
| Requirements | Requires firmware version 3.10.42 (C-series) bzw. 1.11 (X-series). For phase switching the Keba phase switch (KeContact S10) is also required and the switching control via Modbus must be set in the wallbox settings. For the X-series in the web menu, for the C-series via Modbus by setting the value "3" in register 5050. [source, 2026-10-19]evcc sponsor token required |
| Known caveats | None listed in the evcc template. |
“Works for me” reports
No user reports yet. Report your firmware version and setup TODO: form
Where to buy
Shop links will appear here. TODO: affiliate placeholder — no links yet See our affiliate disclosure.