SolarEdge Hybrid Inverter
Hybrid inverter (PV + battery) by SolarEdge. Compatibility with energy supplier apps, Home Assistant and evcc.
At a glance
| Device type | Hybrid inverter (PV + battery) [evcc template, 2026-10-19] |
|---|---|
| evcc support | Yes |
| Connection | Modbus RTU (RS485)Modbus TCP (inferred from evcc template parameters) [evcc template, 2026-10-19] |
| Local control (no cloud) | Yes via evcc's connection type [evcc template, 2026-10-19] |
| Home Assistant | 4 integrations for SolarEdge (brand-level, see below) [first source, 2026-10-19] |
| Known firmware notes | Unknown know this? tell us |
Energy supplier apps
Supplier lists are published per brand (sometimes with model conditions). A brand match does not guarantee your exact model works — check the linked page or the supplier's app.
| Supplier / service | Status for SolarEdge hybrid inverter | Source |
|---|---|---|
| Frank Energie Slim Stroom Handelen, Slim Terugleveren |
Supported, with conditions “Met voorwaarden — Omvormers vanaf 2018”
Supported “Ondersteund”
|
[source, 2026-10-19] |
| Tibber Power-up (inverter, production insight), Slimme aansturing (battery) |
Supported “via cloud” Huawei/SolarEdge: battery steered via the inverter cloud
Supported “direct Power-up (cloud)”
Not every model supported; full list in Tibber app |
[source, 2026-10-19] |
| Zonneplan | Not listed Zonneplan only lists its own hardware | [source, 2026-10-19] |
| Eneco | Unknown know this? tell us | — |
| ANWB Energie | Unknown know this? tell us | — |
| Vattenfall | Unknown know this? tell us | — |
Home Assistant integrations for SolarEdge
Brand-level match: these integrations target SolarEdge hardware; whether they cover the Hybrid Inverter specifically is not verified.
| Integration | Type | Local / cloud | Source |
|---|---|---|---|
SolarEdge solaredge |
Core | cloud_polling | [manifest, 2026-10-19] |
SolarEdge Modbus solaredge_modbus |
Core | local_polling | [manifest, 2026-10-19] |
SolarEdge Modbus solaredge_modbusHome assistant Component for reading data locally from Solaredge inverter through modbus TCP |
HACS ★417 | local (per repo description) | [HACS index, 2026-10-19] |
SolarEdge Modbus Multi Device solaredge_modbus_multiThe Complete Local (Modbus/TCP) SolarEdge Integration for Home Assistant |
HACS ★332 | local (per repo description) | [HACS index, 2026-10-19] |
evcc details
| Template | solaredge-hybrid (meter; usages: grid, pv, battery) [source, 2026-10-19] |
|---|---|
| Connection | Modbus RTU (RS485)Modbus TCP (inferred) |
| Capabilities | battery-control [source, 2026-10-19] |
| Requirements | Only one system can and may have a Modbus TCP connection to the inverter at the same time!
For optional battery control, StorageConf_CtrlMode (0xE004) must be set to 4 "Remote".
Curtailment will limit the export power to the desired percentage of the maximum AC power. The inverter will automatically limit the PV power to achieve this. [source, 2026-10-19] |
| Known caveats | None listed in the evcc template. |
“Works for me” reports
No user reports yet. Report your firmware version and setup TODO: form
Where to buy
Shop links will appear here. TODO: affiliate placeholder — no links yet See our affiliate disclosure.