Sungrow SH Series Hybrid Inverter
Hybrid inverter (PV + battery) by Sungrow. Compatibility with energy supplier apps, Home Assistant and evcc.
At a glance
| Device type | Hybrid inverter (PV + battery) [evcc template, 2026-10-19] |
|---|---|
| evcc support | Yes |
| Connection | Modbus RTU (RS485)Modbus TCP (inferred from evcc template parameters) [evcc template, 2026-10-19] |
| Local control (no cloud) | Yes via evcc's connection type [evcc template, 2026-10-19] |
| Home Assistant | Unknown know this? tell us (brand not yet checked) |
| Known firmware notes | Connections via the WiNet-S dongle (WiFi or LAN) only work with the latest firmware. Older versions do not provide all required data (power, state of charge). [evcc template, 2026-10-19] |
Energy supplier apps
Supplier lists are published per brand (sometimes with model conditions). A brand match does not guarantee your exact model works — check the linked page or the supplier's app.
| Supplier / service | Status for Sungrow hybrid inverter | Source |
|---|---|---|
| Frank Energie Slim Terugleveren |
Supported “Alle modellen”
|
[source, 2026-10-19] |
| Tibber | Not listed Sungrow is not on Tibber's battery / inverter list | [source, 2026-10-19] |
| Zonneplan | Not listed Zonneplan only lists its own hardware | [source, 2026-10-19] |
| Eneco | Unknown know this? tell us | — |
| ANWB Energie | Unknown know this? tell us | — |
| Vattenfall | Unknown know this? tell us | — |
Home Assistant integrations for Sungrow
Unknown know this? tell us — we have not yet checked Home Assistant support for Sungrow.
evcc details
| Template | sungrow-hybrid (meter; usages: grid, pv, battery) [source, 2026-10-19] |
|---|---|
| Connection | Modbus RTU (RS485)Modbus TCP (inferred) |
| Capabilities | battery-control [source, 2026-10-19] |
| Requirements | Connections via the WiNet-S dongle (WiFi or LAN) only work with the latest firmware. Older versions do not provide all required data (power, state of charge). [source, 2026-10-19] |
| Known caveats | For correct operation, maximum charge and discharge power must not be set too high. [issue] [source, 2026-10-19] |
“Works for me” reports
No user reports yet. Report your firmware version and setup TODO: form
Where to buy
Shop links will appear here. TODO: affiliate placeholder — no links yet See our affiliate disclosure.