Home › TinkerForge › WARP3 Pro
TinkerForge WARP3 Pro
EV charger by TinkerForge. Compatibility with energy supplier apps, Home Assistant and evcc.
At a glance
| Device type | EV charger [evcc template, 2026-10-19] |
|---|---|
| evcc support | Yes |
| Connection | Local HTTP API (inferred from evcc template parameters) [evcc template, 2026-10-19] |
| Local control (no cloud) | Yes via evcc's connection type [evcc template, 2026-10-19] |
| Home Assistant | Unknown know this? tell us (brand not yet checked) |
| Known firmware notes | If necessary, WARP3's/WARP4's own automatic phase switching will be deactivated by EVCC when connecting to the wallbox (see [docs.warp-charger.com](https://docs.warp-charger.com/docs/mqtt_http/api_reference/evse#evse_phase_auto_switch_warp3)). Phase switching (1p/3p) is only possible on the WARP2 with an additional WARP Energy Manager, and not possible at all on the WARP1, since it does not support CP separation. RFID on the WARP1 is only available if an NFC Bricklet has been retrofitted. On the WARP4, EVCC can identify the vehicle by its MAC address if "Autocharge" or "Read state of charge" is enabled in the wallbox's ISO 15118 settings. Reading the vehicle SoC via ISO 15118 requires "Read state of charge" and is only available on the WARP4 Pro, since it needs the built-in energy meter. The ISO 15118 features require WARP4 firmware 2.12.2 or later. [evcc template, 2026-10-19] |
Energy supplier apps
Supplier lists are published per brand (sometimes with model conditions). A brand match does not guarantee your exact model works — check the linked page or the supplier's app.
| Supplier / service | Status for TinkerForge charger | Source |
|---|---|---|
| Frank Energie | Not listed TinkerForge is not on Frank Energie's EV-charger list | [source, 2026-10-19] |
| Tibber | Not listed TinkerForge is not on Tibber's EV-charger list | [source, 2026-10-19] |
| Zonneplan | Not listed Zonneplan only lists its own hardware | [source, 2026-10-19] |
| Eneco | Unknown know this? tell us | — |
| ANWB Energie | Unknown know this? tell us | — |
| Vattenfall | Unknown know this? tell us | — |
Home Assistant integrations for TinkerForge
Unknown know this? tell us — we have not yet checked Home Assistant support for TinkerForge.
evcc details
| Template | tinkerforge-warp-ws (charger) [source, 2026-10-19] |
|---|---|
| Connection | Local HTTP API (inferred) |
| Capabilities | mAdim [source, 2026-10-19] |
| Requirements | If necessary, WARP3's/WARP4's own automatic phase switching will be deactivated by EVCC when connecting to the wallbox (see [docs.warp-charger.com](https://docs.warp-charger.com/docs/mqtt_http/api_reference/evse#evse_phase_auto_switch_warp3)). Phase switching (1p/3p) is only possible on the WARP2 with an additional WARP Energy Manager, and not possible at all on the WARP1, since it does not support CP separation. RFID on the WARP1 is only available if an NFC Bricklet has been retrofitted. On the WARP4, EVCC can identify the vehicle by its MAC address if "Autocharge" or "Read state of charge" is enabled in the wallbox's ISO 15118 settings. Reading the vehicle SoC via ISO 15118 requires "Read state of charge" and is only available on the WARP4 Pro, since it needs the built-in energy meter. The ISO 15118 features require WARP4 firmware 2.12.2 or later. [source, 2026-10-19] |
| Known caveats | None listed in the evcc template. |
“Works for me” reports
No user reports yet. Report your firmware version and setup TODO: form
Where to buy
Shop links will appear here. TODO: affiliate placeholder — no links yet See our affiliate disclosure.