Wallbox Pulsar Max (FW 5.x)
EV charger by Wallbox. Compatibility with energy supplier apps, Home Assistant and evcc.
At a glance
| Device type | EV charger [evcc template, 2026-10-19] |
|---|---|
| evcc support | Yes |
| Connection | OCPP (inferred from evcc template parameters) [evcc template, 2026-10-19] |
| Local control (no cloud) | Yes via evcc's connection type [evcc template, 2026-10-19] |
| Home Assistant | 1 integration for Wallbox (brand-level, see below) [first source, 2026-10-19] |
| Known firmware notes | Unknown know this? tell us |
Energy supplier apps
Supplier lists are published per brand (sometimes with model conditions). A brand match does not guarantee your exact model works — check the linked page or the supplier's app.
| Supplier / service | Status for Wallbox charger | Source |
|---|---|---|
| Frank Energie Slim Laden |
Supported “Ondersteund — 10 modellen”
|
[source, 2026-10-19] |
| Tibber Slim laden (charger) |
Supported “integrated charger”
|
[source, 2026-10-19] |
| Zonneplan | Not listed Zonneplan only lists its own hardware | [source, 2026-10-19] |
| Eneco | Unknown know this? tell us | — |
| ANWB Energie | Unknown know this? tell us | — |
| Vattenfall | Unknown know this? tell us | — |
Home Assistant integrations for Wallbox
Brand-level match: these integrations target Wallbox hardware; whether they cover the Pulsar Max (FW 5.x) specifically is not verified.
evcc details
| Template | wallbox-fw5 (charger) [source, 2026-10-19] |
|---|---|
| Connection | OCPP (inferred) |
| Capabilities | dim [source, 2026-10-19] |
| Requirements | Setup Guide: [support.wallbox.com](https://support.wallbox.com/en/knowledge-base/ocpp-activation-and-setup-guide/)
* Switch on "Enable OCPP" (myWallbox app) or enable the "OCPP WebSocket connection" switch (myWallbox Portal)
* Enable "Improved charger control" (Profile -> Experimental functions) (myWallbox app)
* URL: `ws://<evcc-host>:8887/` (local network connection)
* Charge Point Identity: Custom value (e.g. serial number of charger) which is reused in configuration as *stationid*
* Password: leave empty [source, 2026-10-19]evcc sponsor token required |
| Known caveats | OCPP meter values can be missing or incomplete. [issue] The OCPP connection can be unstable and may only recover after restarting evcc. [issue] [source, 2026-10-19] |
“Works for me” reports
No user reports yet. Report your firmware version and setup TODO: form
Where to buy
Shop links will appear here. TODO: affiliate placeholder — no links yet See our affiliate disclosure.