Zendure Solarflow AC / Pro
Home battery by Zendure. Compatibility with energy supplier apps, Home Assistant and evcc.
At a glance
| Device type | Home battery [evcc template, 2026-10-19] |
|---|---|
| evcc support | Yes |
| Connection | Local HTTP API (inferred from evcc template parameters) [evcc template, 2026-10-19] |
| Local control (no cloud) | Yes via evcc's connection type [evcc template, 2026-10-19] |
| Home Assistant | 2 integrations for Zendure (brand-level, see below) [first source, 2026-10-19] |
| Known firmware notes | Unknown know this? tell us |
Energy supplier apps
Supplier lists are published per brand (sometimes with model conditions). A brand match does not guarantee your exact model works — check the linked page or the supplier's app.
| Supplier / service | Status for Zendure battery | Source |
|---|---|---|
| Frank Energie | Not listed Zendure is not on Frank Energie's battery list | [source, 2026-10-19] |
| Tibber | Not listed Zendure is not on Tibber's battery list | [source, 2026-10-19] |
| Zonneplan | Not listed Zonneplan only lists its own hardware | [source, 2026-10-19] |
| Eneco | Not listed Zendure is not on Eneco's battery list | [source, 2026-10-19] |
| ANWB Energie | Unknown know this? tell us | — |
| Vattenfall | Unknown know this? tell us | — |
Home Assistant integrations for Zendure
Brand-level match: these integrations target Zendure hardware; whether they cover the Solarflow AC / Pro specifically is not verified.
| Integration | Type | Local / cloud | Source |
|---|---|---|---|
Zendure Home Assistant Integration zendure_haZendure Home Assistant Integration |
HACS ★431 | Unknown know this? tell us | [HACS index, 2026-10-19] |
Omnibattery omnibatteryCustom integration to monitor and control Marstek Venus and Zendure batteries in Home Assistant. |
HACS ★187 | Unknown know this? tell us | [HACS index, 2026-10-19] |
evcc details
| Template | zendure-solarflow-battery (meter; usages: battery) [source, 2026-10-19] |
|---|---|
| Connection | Local HTTP API (inferred) |
| Capabilities | battery-control [source, 2026-10-19] |
| Requirements | For active battery control, the local API must be enabled via the Zendure App (add HEMS and then exit to apply).
The device serial number can be found in the Zendure App in the device settings.
For forced discharge to grid, Energy Export must also be enabled in the Zendure App. [source, 2026-10-19] |
| Known caveats | None listed in the evcc template. |
“Works for me” reports
No user reports yet. Report your firmware version and setup TODO: form
Where to buy
Shop links will appear here. TODO: affiliate placeholder — no links yet See our affiliate disclosure.