Victron AC load meter on GX device
Energy / P1 meter by Victron. Compatibility with energy supplier apps, Home Assistant and evcc.
At a glance
| Device type | Energy / P1 meter [evcc template, 2026-10-19] |
|---|---|
| evcc support | Yes |
| Connection | Modbus TCP (inferred from evcc template parameters) [evcc template, 2026-10-19] |
| Local control (no cloud) | Yes via evcc's connection type [evcc template, 2026-10-19] |
| Home Assistant | 5 integrations for Victron (brand-level, see below) [first source, 2026-10-19] |
| Known firmware notes | Unknown know this? tell us |
Energy supplier apps
Supplier lists are published per brand (sometimes with model conditions). A brand match does not guarantee your exact model works — check the linked page or the supplier's app.
| Supplier / service | Status for Victron meter | Source |
|---|---|---|
| Frank Energie | Unknown know this? tell us | — |
| Tibber | Unknown know this? tell us | — |
| Zonneplan | Unknown know this? tell us | — |
| Eneco | Unknown know this? tell us | — |
| ANWB Energie | Unknown know this? tell us | — |
| Vattenfall | Unknown know this? tell us | — |
Home Assistant integrations for Victron
Brand-level match: these integrations target Victron hardware; whether they cover the AC load meter on GX device specifically is not verified.
| Integration | Type | Local / cloud | Source |
|---|---|---|---|
Victron GX victron_gx |
Core | local_push | [manifest, 2026-10-19] |
Victron BLE victron_ble |
Core | local_push | [manifest, 2026-10-19] |
Victron Remote Monitoring victron_remote_monitoring |
Core | cloud_polling | [manifest, 2026-10-19] |
victron victronIntegration for Home Assistant to fetch data from the victron gx device via modbusTCP |
HACS ★322 | local (per repo description) | [HACS index, 2026-10-19] |
Victron MQTT Integration victron_mqttHome Assistant Victron GX integration based on the MQTT protocol |
HACS ★205 | local (per repo description) | [HACS index, 2026-10-19] |
evcc details
| Template | victron-gx (meter; usages: aux, charge) [source, 2026-10-19] |
|---|---|
| Connection | Modbus TCP (inferred) |
| Capabilities | Unknown know this? tell us |
| Requirements | For additional meters attached to the GX device that appear as AC load (`com.victronenergy.acload`).
Grid, PV and battery measurement is covered by the `Victron Energy` template.
The meter's Modbus unit id can be found on the GX device under Settings / Integrations / Modbus TCP server / Available services. [source, 2026-10-19] |
| Known caveats | None listed in the evcc template. |
“Works for me” reports
No user reports yet. Report your firmware version and setup TODO: form
Where to buy
Shop links will appear here. TODO: affiliate placeholder — no links yet See our affiliate disclosure.